Since the European micromobility sector began to boom, its manufacturing model has largely followed a common rule: design locally, then manufacture overseas.
Brands across Europe often handle product design, engineering and testing at home, working with specialised factories in countries such as Taiwan, China, Vietnam and Cambodia to manufacture at scale. These international markets have built extensive supply chains, deep technical expertise and efficient production capabilities, making them valued partners for the global bicycle industry.
For European brands, however, manufacturing across long distances can also mean longer lead times, greater exposure to trade and logistics disruptions and additional transportation costs and emissions.
Ghent-based Specter is exploring whether a different approach can work for its bike range.
This year, Co-founder Maarten Baert decided to move frame and parts production to Flanders at a facility around 30 kilometres from the brand’s Ghent headquarters.
“Our Specter 1 model began with a very expensive €10,600 carbon fibre integrated cockpit – completely digital, IoT, everything,” Baert tells Zag Daily.
Recognising that the product would initially sell in relatively small volumes due to a high price point, the company then explored how it could make its next model – the Specter 2 – more affordable while producing more of it in Europe.
“We sat at the table and asked: how can we achieve an affordable price whilst making a very attractive product and how many of the parts is it possible to bring back to Europe?”
Who is Specter?
Specter operates in the speed-pedelec market where bikes can provide electrical assistance at speeds of up to 45kph, compared with the 25kph limit for conventional pedelecs in much of Europe.
Earlier this year, the company launched its second model, the Specter 2, which squarely targets the commuter market. The initial market focus was always Belgium, where Baert observed regular commuting between cities that helped create a market for faster e-bikes that can provide a genuine alternative to the car.
The Specter 2 features an aerodynamic frame and integrated cockpit with a built-in HD screen capable of displaying turn-by-turn navigation. It weighs 30 kilograms and offers an average range of 60 kilometres.
The design concepts grounding the Specter 2 take inspiration from Baert’s passion for cars and a desire to bring automotive technology to the bicycle.
“As a kid, I always wanted to make my own car but that comes with a lot of complications,” he says.
“So I found something close enough.”
Steering to local production
Producing high-tech vehicles in Europe can be challenging, particularly when manufacturers are competing with established international production networks that benefit from specialised expertise, lower labour costs and economies of scale.
Specter is looking to narrow that gap through injection moulding, a manufacturing technique that Baert has taken from the automotive sector.
Traditionally, high-end carbon frames are made by manually layering carbon fibre sheets into a mould before heat-curing them through lengthy production cycles. Instead, Specter uses injection moulding to force carbon-reinforced thermoplastic into precision steel moulds under high pressure.

Specter says the process can produce a frame in approximately 90 seconds. Baert estimates that the equipment can yield between 600 and 700 frames in a 24-hour period, reducing production lead times compared with its previous approach to sourcing frames overseas.
The change has also coincided with lower retail prices. Specter estimates that the recommended retail price of the Specter 1 has fallen from €10,690 to €8,990, while the Specter 2 has dropped from €7,490 to €6,490.
Producing frames closer to its engineering team also gives Specter more direct oversight of the manufacturing process and the opportunity to work more closely with its production partners.
The strategy does not mean abandoning international suppliers, however.
“Lots of other parts are made in the EU. The batteries come from Portugal, gearboxes from Holland. So we try to source as much in Europe but that doesn’t mean we’re never using suppliers in Asia and other nations. If they’re good and competitive, we use them,” Baert explains.
Specter’s approach is therefore less about entirely replacing one manufacturing model with another as it is about finding where local production can offer a commercial and technical advantage. In doing so, its manufacturing strategy has been supported by Flemish regional R&D grants through the O&O, or Research and Development, programme.
According to venture capital firm Fundracer which invested in the company back in 2024, Specter’s approach could provide a test case for whether light electric vehicle manufacturing can be brought closer to European markets without compromising on cost competitiveness.
Can European manufacturing compete on cost?
Specter’s shift comes as European companies reassess how to balance cost, production flexibility and supply chain resilience in an increasingly uncertain trading environment.
René Wiertz, Co-founder and Partner at Fundracer, says the prospect of producing Specter’s bikes in Europe was central to the firm’s investment thesis.
“The plan for a Europe-made Specter 2 was one reason we invested,” Wiertz tells Zag Daily.
“I’ve seen this play out before with Zipp, Cervelo and 3T: producing in Belgium with new injection moulding technology can now cost less than in the Far East, a genuine game changer.”
Wiertz argues that reducing reliance on Asian manufacturing could give European brands greater control over their supply chains as they scale.
“Local production at that price point removes the usual trade-off between speed and cost. It positions Specter to become a top-three player in the speedpedelec market in the next few years.”
The economics are not straightforward, however. Establishing local production requires substantial upfront investment in machinery, tooling and production infrastructure.
“The upfront cost is very, very high. The tooling to make it is a very huge machine and you have to make it all steel,” Baert says.
“Of course, it’s not just making a frame. If you compare it to a car factory, it’s very similar. The whole body of a car is built by a robot. But as soon as you get to putting in the dashboard and connecting all the wires, it’s still a labour-intensive process with people doing it, even today.”
Specter has now begun shipping its first batch of European-made bikes from its Ghent facility, with the company reporting pre-orders that stretch months ahead.

Whether this approach can be replicated by other manufacturers will depend on factors including production volumes, product design, investment costs and the availability of suitable technology. Established overseas manufacturing networks will continue to play an important role in the bicycle industry, particularly where their scale, capabilities and supplier ecosystems offer the advantages.
For Baert, the proposition ultimately rests on the product itself rather than its place of manufacture.
“People won’t buy a bike simply because it says ‘Made in Europe’. It has to be a superior bike first,” he says.
“When you combine high performance, clean technology and local production, it creates a product that speaks for itself.”
